欢迎您访问淄博博山祥用供水泵厂官方网站!

联系我们

淄博博山祥用供水泵厂

手 机:13853356165
电 话:0533-4120113
开户银行:淄博建设银行博山支行
账 号:37001636441050150494
税 号:37030455789489X

您现在的位置: > 产品中心 > DYWS型液下多用泵 >DYWS型液下多用泵

下一页: 没有了!

  • 商品名称: DYWS型液下多用泵
  • 上架时间: 2016/10/27 11:49:45
  • 浏览次数:

DYWS型液下多用泵

一、概述
    DYWS型多用液下泵系单吸离心泵,使用于矿山、造纸、印染、环保、石墨、云
母、黄金、陶瓷、炼油、石油、化工、农场、盐场、碘场、染化、酿酒、食品、化肥碓
化、选厂、建筑、大理石厂、金矿、泥浆、流沙、泥塘、污浊液送吸浓稠液,装料及悬浮
物质的污水作业,也可作煤矿排水及含有泥块的流体。
若与高压水泵、水枪配合,组成水利机械土方工程机组,就可用作农村的土地平整,河道及
池塘的挖井等,小型水利工程的挖方与输方以及城市的防空工程、地下工程等。
二、型号意义
    DYWS -污水、泥桨
    DYWS型多用液下泵叶轮必须沉入液体内部才能正常工作,也可真空抽吸,每种泵都各
有几种不同的长度规格,供用户选用。
三、技术规格

First, an overview

DYWS type multi - use liquid pump system single suction centrifugal pump, used in mining, paper, printing and dyeing, environmental protection, graphite, cloud

Mother, gold, ceramics, oil refining, petroleum, chemical industry, farm, salt, iodine, dyeing, brewing, food, fertilizer and pestle

And plant selection, construction, marble factory, gold, mud, sand, mud, muddy thick liquid suction liquid feeding, filling and suspension

Substances in the sewage work, also can be used for mine drainage and fluid containing mud.

If with high pressure pump, water gun, water conservancy machinery composed of earthmoving machine, it can be used on rural land leveling, and river

The pond dug, small water conservancy engineering excavation and transportation and the city's air defense engineering and underground engineering.

Two, model significance

DYWS - sewage and mud

DYWS type multi use liquid pump impeller must sink into the liquid can be normal work, but also a vacuum suction, each pump

There are several different length specifications for users to choose from.

Three, technical specifications

001 - 副本.jpg

四、结构说明
    DYWS型泵系单级单吸离心泵,流体沿泵体的轴线成90度夹角流动,主体部件有
泵体、叶轮、前盖、泵座、轴连接管、轴承座、支承架、出水弯头、排液管。
    泵的旋转方向从电机端看,泵转子为顺时针旋转,本型泵由电机通过弹性连轴器直接转动。
    该泵还设有防沙装置,用以防止流沙、污物等杂质进入轴承中而加剧磨损影响寿命。
    本泵可垂直式倾斜使用,容易起动,不需引水,安装方便

Four, structural description

Type DYWS pump is a single-stage single suction centrifugal pump, the fluid flow along the axis of the pump body into a 90 degree angle flow.

A pump body, an impeller, a front cover, a pump seat, a shaft connecting pipe, a bearing seat, a supporting frame, a water outlet elbow and a liquid discharging pipe.

The direction of rotation of the pump from the motor side, the pump rotor is rotated clockwise, this type of pump is driven by the motor through elastic coupling direct rotation.

Also the device is provided with a sand pump, to prevent sand, dirt and other impurities into the bearing and wear impact life.

The pump can be used for vertical inclined, easy to start, no water diversion, and convenient installation.

002.jpg

003_副本.jpg


七、安装
    l、安装前的准备工作
    (1)检查泵和电机有无损坏。
    (2)准备工具和起重设备。
    (3)按图检查基础。
    2、安装将泵安装在容器上,用螺栓拧紧(如系水泥基础,需预先设置地脚螺栓)。
    3、如采用吊耳吊装在三撑和其它支撑上,可免去上述步骤。
八、起动及停止
    1、观察泵的安装基础是否稳固,所有各部件螺栓是否拧紧。
    2、检查泵的轴向间隙是否已经调好(板动联轴器无摩擦声即可)。
    3、油杯注入钙基黄油。
    4、检查电机旋转方向是否正确,电源采用三相四线制,必须安装接地线,并应装有与电
机匹配的熔断器开关,以防泵在工作时被杂物卡死烧坏电机。
    5、泵长期停止运行时,应将泵拆开,并擦拭干净,涂上防锈油,装配好后妥善保存。
九、运转
    1、注意泵轴承温度,不应超过外界温度35℃,但最高不应大于55℃。
    2、油杯内应注满钙基黄油,保证轴承能正常润滑,该泵在联接管上方钻·一油孔,使用前
先由此孔加足机油后,每10 - 15天加注一次。
    3、在泵工作第一个月内或运转1000小时后,应清洗轴承和轴承室,仔细检查轴承是否
应该更换,更换油杯中黄油,下支撑架内的填料每600小时要更换一次,更换填料不得过
紧。以免烧毁填料。
  4、泵在运转中,如泵进口被杂草或其它纤维杂物堵塞时,可将电机停稳,再反转2,5秒
钟后正向启动,则长纤维便在叶轮进口处自行破碎,并随液体一道排出。
  5、运转过程中,如发现不正常的声音时,应立即停车检查。

Seven, installation

L, preparation before installation

(1) to check whether the pump and motor are damaged.

(2) preparation of tools and lifting equipment.

(3) on the basis of the chart.

2, install pump installed in the container, with the bolt (for the cement foundation to preset anchor bolts).

3, such as the use of lifting lug in three support and other support, to avoid the above steps.

Eight, start and stop

1, the installation of the pump is a solid foundation, all parts of the bolt is tightened.

2, check whether the axial clearance of the pump has been adjusted (plate coupling without friction sound can be).

3, the oil injected calcium grease.

4, check the motor rotation direction is correct, the power supply using three-phase four wire system, you must install the ground wire, and should be equipped with power

Fuse switch machine, to prevent pump debris stuck to burn out the motor at work.

5, the pump for a long time to stop running, the pump should be open, and wipe clean, coated with anti rust oil, properly stored after assembly.

Nine, operation

1, pay attention to pump bearing temperature, should not exceed the outside temperature of 35 degrees, but the maximum should not be greater than 55.

2, an internal filling calcium grease, can ensure normal bearing lubrication, the pump on the connecting tube above the drill a hole, before use

By this Jiazu oil hole, every 10 - 15 days with a.

3, in the first month or 1000 hours after the pump operation, should clean the bearing and bearing room, carefully check whether the bearing

Should be replaced, the replacement of oil in butter, under the support of packing should be replaced once every 600 hours, replace the packing shall not be too

Tight. So as not to burn the filler.

4, the pump in operation, such as pump imported by weeds or other fiber debris blockage, the motor can be stopped, and then reverse 5, 2 seconds

After the start of the clock, the long fiber will be at the entrance of the impeller itself broken, and with the liquid discharge.

5, in the process of operation, such as abnormal sound found, should immediately stop the inspection.

十、可能发生的故障及其解决方法

343434.JPG

十一、YWF耐腐蚀液下泵说明
一、简介:
  根据用户需求,我厂生产的耐腐蚀泵YWF型液下泵,其结构和安装尺寸、主机性能与
同类型的普通清水泵相同,均为单级单吸悬臂式离心泵。每种型号都采用了不同的材质来满
足不同的耐腐蚀性能要求,其过流部分材质有高硅铁,lGr18Ni9Ti,Gr18Ni12M02Ti,及
环氧玻璃钢。供化工、石油、冶金、合成纤维、医药等部门随意选用
    我厂还承接其它各类排灌机械设备的防腐处理和生产业务,欢迎各界朋友前来洽商。
二、各种材质的耐腐蚀性能详见附表:
    环氧玻璃钢材质耐腐蚀性能表

Eleven, YWF corrosion resistant liquid pump instructions

Brief introduction:

According to user needs, I plant the production of corrosion resistant pump YWF type liquid pump, the structure and installation dimensions, the performance of the host and

The general water pump of the same type are the same, a single-stage single suction cantilever centrifugal pump. Each model uses a different material to fill the

Different corrosion resistant properties, which have high ferrosilicon, flow of material lGr18Ni9Ti, Gr18Ni12M02Ti, and

Epoxy glass fiber reinforced plastic. For chemical, petroleum, metallurgy, synthetic fiber, medicine and other departments at random selection

Our factory also undertake other kinds of drainage and irrigation machinery and equipment corrosion production and processing business, welcome all friends to come to negotiate.

Two, the corrosion resistance of various materials, see the schedule:

Corrosion resistance of epoxy glass fiber reinforced plastics

008_副本.jpg

009_副本.jpg


友情链接:K45风机 重晶石 淄博车牌识别系统 淄博电动伸缩门 淄博网络推广公司 淄博百度 智能水表 超声波热量表 低压开关柜 蓝莓苗 中空板印刷 脱毒红薯苗 高温风机 陶瓷缸套 煤气加压风机 2BE真空泵 2BE真空泵 淄博别墅装修 浇注料 k40风机 主扇风机 淄博风机厂 不锈钢风机 滨州路灯车出租